HIPLUS AIRE ACONDICIONADO, S.L.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.

DESCRIPTION The units of CLVA/CLVBA series are direct expansion evaporator units, suitable for connection to a network of air distribution ducts. These units are deigned to work together with any outdoor unit, heat pump or cooling only, of an equivalent cooling capacity. Models 201 at 501 have the option to operate on direct discharge by means of an optional air discharge plenum equipped with any anodized aluminium grille for direct discharge. CABINET Cabinet is made of galvanized steel sheet, finished with polyester powder, electrostatically applied and oven-polymerized of optimum resistance to corrosion. The assembly is internally lined with thermoacoustic insulation. REFRIGERANT CIRCUIT -Interior coil -Refrigeration lines made by ACR cooper. -Expansion system These units are supplied with a perfectly sealed refrigeration circuit incorporating a nitrogen charge. INTERIOR EXCHANGER Coil is made of aluminium fins and 3/8” copper tubing, mechanically expanded, of high exchanging efficiency. FANS Centrifugal fans of double suction that allow for duct application. Driven by transmission made through pulleys and adjustable belt or direct transmission (depends on model). Fans are of reduced sound power level, incorporate pre-lubricated bearings and are static and dynamically balanced. EXPANSION DEVICE Models from 251 to 501 have restrictors, bigger units have expansion valves. AIR FILTER Made of washable polyurethane foam, S-20 high efficiency filtering.