20 - Water terminal unit, wall mounted fan coil FPW
GENERAL
The FPW water fan coils are used for cooling and heating applications, for small and large rooms. This fan coils are equipped with ionization systems: a flashover inside the unit is transmitted to carbon fibres which produce negative ions. This devise purifies the air neutralizing the microbes.
TANGENTIAL FANS
Selected for high air volumes at low speeds to guarantee a low noise level.
WATER COIL
Made of copper tubes mechanically expanded into aluminium fins.
The headers are equipped with female fittings (GAS theads) and easily accessible air vents.
CABINET
Moderm and elegant design made to avoid corrosion, bleds easily.
WORKING LIMITS:
• Maximum water temperature 80 oC.
• Maximum working pressure 10 Bar.
AIR FLOW
The Airflow deflector opens and closes automatically when the unit is turned on or switched off. The very low noise airflow can be adjusted manually to the right or left. The high/low adjustment of the airflow in 5 different positions is made by an infrared remote control.
A BETTER AIR FLOW
• In cooling mode, the supply air deflector swings up thus avoiding the airflow being directed to the lower part of the room.
• In heating mode the supply air deflector swings down to distribute the hot air uniformly in the lower parts of the room.
STANDARD ACCESSORIES
• Air filter
• Ionizator (only models FPW 1 and FPW 2)
• Swing motorized supply air deflector
• Infrared remote control with display
• Function automatic or manual
• Fan speed automatic
• Minium low water temperature sensor
• Wall hook brackets
PDF