HIPLUS AIRE ACONDICIONADO, S.L.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.

General The EHWM series of air handling units are specially designed to complement and optimise air conditioning systems in buildings in terms of air handling (ventilation, heating, filtering, humidity management, etc.). They have been designed to offer maximum flexibility in the selection, design and installation. This equipment are available in 44 sizes with a range of flows between 1.000 and 80.000 m3/h (from 0,278 to 22,222 m3/s) and total pressures that can reach a maximum of 2.500 Pa. Anyway, if the client asks for it, units with higher flow and pressure can be manufactured. Such a complete serie enables to choose the more appropiate necessary front speed. Regarding sizes, the serie is developed -in length, width and height- in a base module of 160 mm and expects 28 base models and 16 alternative models (reduced). This last ones are characterized by a rectangular front section with the aim of reducing the height, to detriment of the width, when the installation conditions require it. Likewise, units with 3 or 4 height modules (670 and 830 mm respectively for maximum flows of 10.000 m3/h) can be supplied without the platform to reduce height 120 m (to 550 and 710 mm respectively) and facilitate consequently its installation in the ceiling. The maximum dimensions of the sections composing the air handling units allow without any problems transport in containers.