CIRCUTOR S.A.U.

Single-phase electrical energy meter, up to 65 A. Built-in LCD display (7 digits) with rotating screen system. Features an optical communication port (OSC system) on the side of the unit for installing the communication module (CEM-M). Also features 2 buttons (1 sealable button) for viewing all the measured information. Other features include: MID certification, module B+D (depending on the type) Class 1 active energy (Class B, in accordance with MID), Class 2 reactive energy Complies with the EN 50470 (MID European standards) or IEC 62053-21 standards (international standards), depending on the type. Compact size (2 modules, 36 mm) Resettable partial meter 1 programmable impulse output, in accordance with DIN 43864 Indicates bad connections on the screen Energy storage, even in the case of bad connections

Single-phase electrical energy meter, up to 65 A. Built-in LCD display (7 digits) with rotating screen system. Features an optical communication port (OSC system) on the side of the unit for installing the communication module (CEM-M). Also features 2 buttons (1 sealable button) for viewing all the measured information. Other features include: MID certification, module B+D (depending on the type) Class 1 active energy (Class B, in accordance with MID), Class 2 reactive energy Complies with the EN 50470 (MID European standards) or IEC 62053-21 standards (international standards), depending on the type. Compact size (2 modules, 36 mm) Resettable partial meter 1 programmable impulse output, in accordance with DIN 43864 Indicates bad connections on the screen Energy storage, even in the case of bad connections

CEM-M are interchangeable communication modules for the CEM-C energy meters assembled on DIN rails. These modules can increase the performance of the energy meters, so that any meter can be adapted to the communication systems in place in the installation. Energy management systems require the use of meters that comply with international measurement regulations, but which can also be integrated with the standard communication protocols used in buildings. The CEM-M range allows the user to install the CEM-C meter that is best suited to the installation (single-phase, direct three-phase or indirect three-phase), subsequently adding the most adequate CEM-M module, in accordance with the communications protocol. The following can be performed with the modular system, among other actions: Selecting the energy meter and subsequently adding the communication systems required by the BMS. Reducing the stock of references, since the meter should not be replaced, regardless of whether the client chooses to read the meter remotely or not and to do so with a specific protocol.

Energy meter EM 30-C

Energy meter EMS30-C

CEM-C5 is a single-phase active energy meter (kWh) that can measure up to 50 A. The unit can measure energy in one direction (Absolute Measurement) with Class 1 accuracy. It also features an integrated digital output for generating impulses depending on the energy measured. Other features: Complies with the IEC 62052-11 and IEC 62053-21 standards (general and specific requirements of measuring units) Compact dimensions (1 DIN rail module, 18 mm) Backlit LCD display (7 digits) Sealable (anti-fraud).

M-Bus to Modbus Converter, up to 8 Mbus slaves

M-Bus to Modbus Converter, up to 24 Mbus slaves

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.

This new range presents a series of improvements above all in the installation of equipment in switchboards. Along with the usual installation fixtures, we add the possibility of doing it with a DIN rail by means of an accessory, which would facilitate its installation. The WGC series earth leakage transformers have a greater immunity to transitory type current peaks that usually cause differential protection triggers. The earth leakage transformers of the WGC Series have been designed to work with the relays of the WGC Series. The sensitivity (trigger current) of the transformer-relay set is established by the associated relay.