×

Productos

    Abrir menu

    SISTEMAS TECNICOS DEL ACCESORIO Y COMPONENTES SL

    Polígono industrial Picusa
    La Matanza s/n
    15900 PADRÓN (A Coruña)
    REQUEST A QUOTE/INFORMATION
    X

    STACBOND®FR STB-SZ ventilated facade system - 4mm

    STACBOND_FR_SZ
    0EUR
    SELECCIONAR PRODUCTO
    Supply and installation of external wall facing based on 4mm (total thickness) STACBOND ® FR aluminium composite panels (Fire rating B-s1-d0). The panels are composed of a double layer of 0.5 mm sheet aluminium (exterior and interior face) in accordance with EN 485-4:1993 with a 3 mm intermediate, low density, fire retardant core (total weight approx. 8.02 kg/m2).External face:5005 aluminium alloy in accordance with UNE-EN 485-2; Thermal transmission 5.62 W/m²K, Sound Reduction Index (UNE-EN ISO 140-3:1995) Rw (C;Ctr) (dB), 29 (0;-2). Exterior face of aluminium lacquered (22/40 thickness), colour to be defined by project management and finished with PVdF Kynar 500 70/30 (70% polyvinylidene fluoride, 30% acrylic resin) with 100 µ protective plastic film. Interior face of aluminium lacquered. The pre-treatments used for both aluminium faces are chromium free.
    The building envelope is completed with trim for lintels, sills, jambs, thresholds and specific elements via the manufacture of special parts composed of the same panels and with joints to allow free expansion. Sill trims have a minimum fall of 17% (10º) in accordance with Code.
    SUBSTRUCTURE:(The harshness of the environment must be taken into account in accordance with Code SE-AE Wind Effect to calculate the Velocity Pressure Exposure Coefficient). Installed with vertical and/or horizontal modulation, leaving 10 mm slots between sheets via a system of sheets composed of an auxiliary support structure of extruded 6063 T5/T6 aluminium alloy Omega profiles (Ref. 05.19.003 SCH-2), levelled via double T anchors (Ref.05.19.004 SCH-1) and/or U anchors (Ref.05.19.046); panels are fixed to the profiles on upper and lower parts to the profiles (Ref.05.19.001 SC-S and Ref.05.19.002 SC-Z); the "Z" profile is fixed at a later time to the "Omega" profile. If the calculations show a need reinforcement, this will be using extruded "L" profiles (ref. 05.99.231) screwed to all Omegas and glued to the panels using Sikatack-Panel adhesive (or similar).
    ×
    Filtros
    Visualizar en modo Cuadrícula Visualizar en modo Listado
    anterior
    página de
    siguiente
    Las cookies nos permiten ofrecer nuestros servicios de forma más rápida y personalizada. Al acceder y continuar navegando en esta web acepta el uso de cookies. Para más información, lea nuestra Política de cookies
    Aceptar
    X

    Suscríbete!

    56.000 usuarios

    ya reciben toda la actualidad de la
    Arquitectura, Ingeniería y Construcción

    SUSCRÍBETE